1.Deluge Valve:
Deluge valve is used to control water flow in Deluge, Pre-Action as well as Foam systems. Deluge suppression systems are typically used in special hazard installations when water must be applied to an entire area for fire protection. These systems are considered a ‘dry fire protection system’ as the piping for the system is empty and at an atmospheric pressure with the sprinkler heads all open.
2.Air Cylinder:
Air cylinder, is a mechanical device which uses the power of compressed gas to produce a force in a reciprocating linear motion.
3.Control Valve:
A control valve is a valve used to control fluid flow by varying the size of the flow passage as directed by a signal from a controller.
4. Pressure Safety Valve:
A Pressure Safety Valve, also referred to as a pop-off valve, is a type of Pressure Relieving Device (PRD) that is used to release gases or liquids, and thus relieve pressure, in the case that the pressure in a vessel reaches a pre-determined setpoint.
5. Control Ball Valve:
A ball valve is a type of quarter-turn valve with a hollow ball to control flow through it. A 90-degree turn of the valve will position the ball’s hole in line with the flow direction, and the reverse will completely shut-off the valve in the closed position.
6. Lontrode Sensor:
The IonoTrode pH sensor offers many unique features that make it well suited for high purity water measurement.
7. Flow Meter:
A flow meter is a device designed for measuring nonlinear or linear flow rate. It measures the volumetric or mass flow rate of gases or liquids. Before choosing a flow meter to use in an application, a few factors need to be considered.
8. SM6 Switchboard:
SM6 is a comprehensive range composed of metal-enclosed switchgear and control-gear modular units up to 24 kV. It is easily adaptable to your specific requirements.
9. Operator Interface ET-8A:
An operator interface is a device (or more) by which the operator gives orders to the controller of a process and receives from the controller the process current state.
10. Sabroe Compressor Chiller:
Sabroe’s reciprocating compressors are designed for use in refrigeration, air-conditioning, and heat-pump operations in even the toughest industrial, marine, and offshore applications.
11.Solenoid Valve – 5-Port:
Solenoid valves are used wherever fluid flow must be controlled automatically. They are being used to an increasing degree in the most varied types of plants and equipment.
12. Variable Frequency Drive (VFD) & SOFT:
A variable-frequency drive (VFD, or adjustable-frequency drives, adjustable-speed drives), variable-speed drives, AC drives, micro drives, inverter drives, or drives) is a type of AC motor drive (system incorporating a motor) that controls speed and torque by varying the frequency of the input electricity. Depending on its topology, it controls the associated voltage or current variation.
13. Mitutoyo Digimatic Holtest:
The Mitutoyo Holtest series, known for its highly stable three-point self-centering action has been further enhanced with titanium nitride coated contact surfaces.
